Displaying A Group Report - Cisco CiscoWorks 1105 User Manual

Displaying Current Reports

Displaying a Group Report

User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-12
EAP Authentication Report—See
•
page 5-30
AP Ethertype Protocol Filters—See
•
Filters Report, page 5-32
• AP IP Protocol Filters—See
page 5-33
• AP IP Port Filters—See
• AP Policy Report—See
AP QBSS QoS Report—Displaying an AP QBSS QoS Report, page 5-38
•
• AP SSID Report—Displaying an AP SSID Report, page 5-40
• AP VLAN Report—Displaying an AP VLAN Report, page 5-42
Per VLAN Client
•
Individual Switch Reports
• Switch Summary Report—See
page 5-45
• AP and Bridge Connected to Switch Report—See
Bridge Connected to Switch Report, page 5-46
Individual Router Reports
Router Summary Report—See
•
page 5-47
AP and Bridge Connected to Router Report—See
•
Bridge Connected to Router Report, page 5-48
Individual Server Reports
Server Summary Report—See
•
page 5-49
This report lists all the currently connected access points and bridges in a given
group and the total number of clients connected to them. It shows the last polled
values and the overall status for the group.
Displaying an EAP Authentication Report,
Displaying an AP Ethertype Protocol
Displaying an AP IP Protocol Filters Report,
Displaying an AP IP Port Filters Report, page 5-35
Displaying an AP Policy Report, page 5-36
Report—Displaying a Per VLAN Client Report, page 5-43
Displaying a Switch Summary Report,
Displaying a Router Summary Report,
Displaying a Server Summary Report,
Chapter 5 Using Reports
Displaying an AP and
Displaying an AP and
78-14947-01