Cisco CiscoWorks 1105 User Manual page 280

Displaying Current Reports
If you want to search for the device, use the dialog box in the left pane above the
Step 2
device selector:
a.
b.
From the device selector in the left pane, click to expand the folder and select the
Step 3
access point for which you want a report. The right pane refreshes.
Step 4 From the Report Name list, select Per VLAN Client Report.
Click View. The report is displayed with the following headings:
Step 5
Table 5-25 Per VLAN Client Report
Column
VLAN ID
VLAN Name
Client MAC
Address
Client Name
Client IP Address
SSID
Client Type
As Of
To sort table data, click on the column heading you want to use to sort the data:
Step 6
•
•
•
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-44
From the list, select the method you want to use to search for the device: by
name or by IP address.
Enter the IP address or name, or use an asterisk (*) as a wildcard to denote
numbers and letters, then click Search. The requested device appears in the
Search Results folder.
Description
The identification number of the VLAN.
The name of the VLAN.
The MAC address of the client.
The name of the client.
The IP address of the client.
The unique identifier the client device uses to associate
with the access point.
The type of client associated to the access point.
The time the access point's state last changed.
For more information, see
A triangle indicates ascending order.
An upside-down triangle indicates descending order.
No triangle indicates that the data is not sorted.
Chapter 5 Using Reports
Time Display, page 1-5.
78-14947-01