Cisco CiscoWorks 1105 User Manual page 28

Getting Started with Device Management
Table 1-2 Basic Initial Tasks (continued)
Task
6. Move devices to the managed state and
run inventory.
7. Create other users and user roles as
needed.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
1-8
Description and References
You must move devices to the managed state on the
WLSE before you can use configuration, reporting, and
monitoring features; or you can specify that all
discovered devices be automatically managed (see
Managing Devices, page
the managed state, you can run an immediate inventory
to obtain device information needed to use such WLSE
features as reports and automatic grouping (see
Inventories, page 6-24).
The WLSE has one predefined user (the system
administrator with the username admin) and four
predefined user roles. User roles are used to specify the
WLSE functions a given user can have access to. To
allow other users access to the WLSE, the system
administrator must add users. The system administrator
can also create roles to customize user access. See
Administering Users, page
Chapter 1 Getting Started
6-2). After moving devices to
6-75.
78-14947-01
Running