Cisco CiscoWorks 1105 User Manual page 267

Chapter 5 Using Reports
If you want to search for the device, use the dialog box in the left pane above the
Step 2
device selector:
a.
b.
From the device selector in the left pane, click to expand the folder and select the
Step 3
access point for which you want a report. The right pane refreshes.
Step 4 From the Report Name list, select EAP Authentication Report.
Click View. The report is displayed with the following headings:
Step 5
Table 5-17 EAP Authentication Report
Column
Server Name
Server Protocol
Server Priority
Server Port
78-14947-01
From the list, select the method you want to use to search for the device: by
name or by IP address.
Enter the IP address or name, or use an asterisk (*) as a wildcard to denote
numbers and letters, then click Search. The requested device appears in the
Search Results folder.
Description
The name of the authentication server.
The protocol used by the server.
The priority of the server when multiple servers are
configured for the same service.
The communication port setting used by the access point
and the server.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Displaying Current Reports
5-31