Cisco CiscoWorks 1105 User Manual page 342

Using Discovery and Managing Devices
Step 4
Manage EAP-MD5 Servers
Note
Step 1
Step 2
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-36
From the list, select the server you want to remove, then click Submit.
b.
For information on changing the polling interval and response time fault
thresholds for RADIUS servers, see
Your login determines whether you can use this option.
Procedure
To add, modify or delete a EAP-MD5 server:
To add an EAP-MD5 server:
Select Administration > Discover > EAP-MD5 SERVER > Add Server.
a.
The EAP-MD5 Server: Add Server dialog box appears.
Complete the following:
b.
Text Box Description
Server Name Name or IP address of the AAA server.
Server Port Number of the port on the server that is used for
authentication; this is always port 1645.
Username Client username that you entered on the AAA server.
Password Client password that you entered on the AAA server.
Secret Shared secret key that you entered on the AAA server.
To add the server, click Submit. To clear all data from the textboxes, click
c.
Reset.
To modify an EAP-MD5 server:
a. Select Administration > Discover > EAP-MD5 Server > Modify Server.
The EAP-MD5 Server: Modify Server dialog box appears.
Chapter 6 Performing Administrative Tasks
Specifying Fault Thresholds, page 2-15.
78-14947-01