Chapter 3
Configuring Devices
Configuring Port Assignments
Step 1
Step 2
Step 3
78-14947-01
When you assign specific ports, your network topology remains constant even
when devices reboot.
Procedure
Select Association > Port Assignments. The Association: Port Assignments
dialog box appears.
To define port assignments, enter the following:
Clicking Clear removes all the current entries in the window and any
Note
entries you have made in other Template windows up until that point.
Table 3-11 Port Assignments Settings
Field
Description
ifIndex
Lists the port's designator in the Standard MIB-II
(RFC1213-MIB.my) interface index.
dot1dBasePort
Lists the port's designator in the Bridge MIB (RFC1493;
BRIDGE-MIB.my) interface index.
AID
Lists the port's 802.11 radio drivers association
identifier.
Station
Enter the MAC address of the device to which you want
to assign the port.
Select one of the following in the left pane:
Preview to see your changes before you apply them. (See
•
Template, page
3-131.)
•
Finish to save the template. (See
Another template category to configure more options. (See
•
Categories, page
3-2.)
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Finishing the Template, page
Using the Templates
Previewing the
3-132.)
Template
3-47