Cisco CiscoWorks 1105 User Manual page 223

Chapter 4 Updating Device Firmware
Step 2
Step 3
Selecting the Image
Step 1
Step 2
Step 3
78-14947-01
Complete the following:
Table 4-4 Job Name Parameters
Field
Job Name
Description
Protocol
From the menu in the left pane, go to the next step, Select Image. See
the Image, page 4-11.
Procedure
Click Select Image. The Firmware Images selector appears.
Expand the device folder and select the image you want to upload. The Image
Detail window opens.
If the desired image does not appear, you must import it to the WLSE. For more
information, see Importing Images, page
From the menu in the left pane, go to the next step, Select Devices. See
Devices, page 4-12.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
Enter a name for the job. For guidelines on naming
jobs, see Naming Guidelines, page
Enter a description of the job. For guidelines on
entering descriptions, see
page A-1.
Select the protocol to be used for the job: HTTP or
SNMP.
4-4.
Managing Firmware Jobs
A-1.
Naming Guidelines,
Selecting
Selecting
4-11