Cisco CiscoWorks 1105 User Manual page 332

Using Discovery and Managing Devices
Step 4
Step 5
Immediate Inventory of All Devices
Note
Step 1
Step 2
Step 3
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-26
Click Run Inventory for Selected Devices. The inventory job starts immediately.
Managed devices are polled and information is collected. WLSE displays are
updated accordingly.
The Tasks History window appears. You can expand the Inventory folder to see
the results of the inventory collection:
Inventories of selected devices are named InventoryRunNow_number. The
•
number increments each time you run an inventory.
Click the inventory name. The Run Log appears, showing the start and end
•
times of the inventory and the type of data that was collected for the devices
you selected.
Use this option to run an immediate inventory of all devices. This inventory is the
same as the scheduled basic inventory. Inventories that collect data for all devices
are named Inventory, whether they are scheduled inventories or immediate
inventories run by a user.
Your login determines whether you can use this option
Procedure
Select Administration > Discover > Inventory > Inventory All Devices.
Click Inventory All Devices. The inventory job starts immediately. Managed
devices are polled and information is collected. WLSE displays are updated
accordingly.
If an inventory is currently running, a message appears. You should wait for the
running inventory to complete before starting the immediate inventory.
The Tasks History window appears. You can expand the Inventory folder to see
the results of the inventory collection.
• Inventories of all devices are named Inventory.
Chapter 6 Performing Administrative Tasks
78-14947-01