Cisco CiscoWorks 1105 User Manual page 186

Using the Templates
Finishing the Template
Step 1
Step 2
Step 3
Step 4
Creating a Template
Note
Step 1
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-132
Procedure
Click Finish in the left pane to complete creating a template. The Finish dialog
box appears in the right pane.
It is recommended that you always validate the template before saving it.
Note
Click Validate if you want to check the template configuration. A window
displays a message indicating for which devices and versions the configuration
template you just created is valid.
Templates containing custom key values are not validated.
Note
Check Enable Version Checking if you want the system to make sure you apply
the templates only to devices with valid versions.
If you do not enable the version check, templates will be applied to devices even
when the configuration is not valid for the device version.
Click Save to create the template. The screen refreshes and the template name
appears in the Existing Templates listbox.
Use this option to create a configuration template.
Your login determines whether you can use this option.
Procedure
Select Configure > Templates. The Templates dialog box appears.
Chapter 3 Configuring Devices
78-14947-01