Cisco CiscoWorks 1105 User Manual page 41

Chapter 2 Fault Monitoring
•
•
•
•
•
•
To activate the policy, do the following:
Step 2
Field
Verify
Poll Interval
Severity
Enter ssid
Step 3 Click Add to add the SSID to the list, then go to
To remove an SSID from the list, select it, click Remove, then go to
Step 4
To activate the policy, do the following:
Step 5
Field
Verify
Poll Interval
Severity
Enter Firmware Version
Click Add to add the firmware version to the list, then go to
Step 6
78-14947-01
WEP Key Length—Go to
HTTP Disabled—Go to
Telnet Disabled—Go to
PSPF Enabled—Go to
User Manager Enforced—Go to
HTTP Authentication—Go to
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Step 10
Step 8
Step 8
Step 8
Step 8
Step 8
Description
Select if you want to verify that SSID is enabled.
From the list, select the polling interval.
From the list, select a severity level to associate
with this policy.
Enter the unique identifier used by client
devices to associate with the access point. Any
alphanumeric character up to 32 characters
long.
Description
Select if you want to verify that firmware
version is enabled.
From the list, select the polling interval.
From the list, select a severity level to associate
with this policy.
Enter the firmware version.
Managing Profiles
Step 11.
Step
Step 11.
11.
2-13