Specifying Name Servers; Specifying An Smtp Mail Server - Cisco CiscoWorks 1105 User Manual

Chapter 6 Performing Administrative Tasks

Specifying Name Servers

Note
Step 1
Step 2
Step 3

Specifying an SMTP Mail Server

Note
Step 1
Step 2
78-14947-01
You can specify the addresses of up to three name servers for name and address
resolution.
Your login determines whether you can use this option.
Procedure
Select Administration > Appliance > TIME/NTP/NAME.
To remove a name server, select it from the Current Servers list and click Remove.
To add a name server, enter its IP address in the Name Server IP Address textbox
and click Enable.
To ensure that WLSE email notifications reach their destinations, you can specify
an SMTP mail server. This setting affects email notifications about firmware and
configuration jobs, email of reports, and email of fault notifications.
Your login determines whether you can use this option.
Procedure
Select Administration > Appliance > Configure Mailroute.
Enter the hostname or IP address of an SMTP mail server on your network and
click Save.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Managing the Appliance
6-71