Chapter 6
Performing Administrative Tasks
System Log
Setting Up the Splash Screen Message
Step 1
Step 2
Step 3
Note
Setting the Current Time and Date on the WLSE
78-14947-01
The system log, which describes the status of the processes running in the system,
displays the following:
Field
Description
Timestamp
The date and time the message is logged.
Process
The process that logged the message.
Type
The message type, such as INFO, WARNING, CRITICAL.
Information
The process status as known by the Daemon Manager.
The Splash Screen option allows you to set up a message that is displayed when
a user logs in. After viewing the message, the user clicks Agree to continue
logging in Disagree to log out.
Procedure
Select Administration > Appliance > Splash Screen. The Splash Screen
Message window appears.
Enter the message to be displayed.
Check the Enable check box, then click Apply. The splash screen message is
enabled.
You must check Enable for the message to appear.
This option allows you to set the current time and date on the WLSE. This time
and date appear in WLSE displays.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Managing the Appliance
6-69