Ip Domain-Name - Cisco CiscoWorks 1105 User Manual

Appendix B Command Reference
Usage Guidelines
Step 1
Step 2
Step 3
Example

ip domain-name

Syntax Description
78-14947-01
Use the interface command to configure an Ethernet interface.
If you change the IP address or hostname, follow these steps to ensure that
applications using the system can connect to it correctly:
Stop and restart management services by entering:
# services stop
# services start
Verify that management applications that use the system can still connect to it.
Reconnect any applications that cannot connect to it using the system's new IP
address or hostname.
This command disables the Ethernet 1 interface:
interface eth1 down
This command sets the Ethernet 0 IP address, netmask, and gateway IP address:
interface eth0 209.165.200.224 255.255.255.224 default-gateway
209.165.201.31 up
To define a default domain name, use the ip domain-name command. To remove
the default domain name, use the no form of the command.
ip domain-name name
no ip domain-name name
name Domain name (e.g. cisco.com).
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Privilege Level 15 Commands
B-31