Reload - Cisco CiscoWorks 1105 User Manual

Appendix B Command Reference
Related Commands

reload

Syntax Description
Usage Guidelines
Caution
Example
Related Commands
78-14947-01
This command configures the system to stop using the NTP server:
no ntp server 209.165.201.0
clock
To reboot the system, use the reload command.
reload
This command has no arguments or keywords.
Use the reload command to reboot the system.
You are prompted to verify the reload. Enter yes to confirm or no to cancel the
reload.
All processes running on the system stop when you run the reload command. The
WLSE will not respond while it is reloading.
This command reboots the system:
reload
shutdown
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Privilege Level 15 Commands
B-39