Cisco CiscoWorks 1105 User Manual page 372

Managing the Appliance
Step 1
Step 2
Step 3
Step 4
Viewing Processes
Step 1
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-66
Procedure
Select Administration > Appliance > Diagnostics > Self Test. The WLSE
Self-Test Report dialog box appears.
To display a report, click its name. If there are no reports listed, you must create
a new report by clicking Create.
To display the new report, click its name. If the report is not displayed, click
Refresh.
To delete a report, select the report check box, then click Delete.
Related Topics
Viewing and Creating a Status Report, page 6-65
•
• Viewing Processes, page 6-66
You can view the status of the major processes running on the Wireless LAN
Solution Engine using this option. You can also start and stop processes and
access complete reports.
Procedure
Select Administration > Appliance > Diagnostics > Processes. The Process
Report displays the following:
Column Description
Process name Describes how a process is registered. For information on the
processes displayed, see
State Process status and a summary of the log file entries for the
process.
Pid Process ID. A unique number by which the operating system
identifies each running program.
Chapter 6 Performing Administrative Tasks
Processes Displayed, page 6-68.
78-14947-01