Cisco CiscoWorks 1105 User Manual page 344

Managing Groups
System-Defined Groups
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-38
The device selector lists all the current groups, both system-defined groups and
user-defined groups. The number after a group name or folder shows how many
objects are in the group (devices and other groups) or how many groups are in the
folder. Every managed device appears in one or more of the system-defined
groups, and may also appear in user-defined groups.
There are six system-defined folders containing system-defined groups.
You cannot edit or delete a system-defined group. The system defined groups are
automatically populated using information read from the devices during discovery
and inventory collection. Any changes on devices are reflected in the
system-defined groups only after the next discovery or inventory collection has
completed. The system-defined groups and folders are:
Device Type folder—Contains groups for AAA servers, 1200 APs, 340 APs,
•
350 APs, 350 Bridges, Routers, and Switches.
Note 4800 APs will appear in the system folder for 350 APs.
• Location folder—Contains groups based on the locations of the devices. To
enable creation of system-defined location groups, you must configure a
parameter on the device that identifies the device location. See
Devices, page 6-12
group contains all devices that are not configured with their location
information.
SSID folder—Contains a group for each primary radio service set ID (SSID)
•
configured on access points. For information on configuring the SSID, see
Up Devices, page 6-12
Software Version folder—Contains a group for each software version
•
detected on the devices.
Subnet folder—Contains a group for each subnet configured in the network.
•
• VLAN folder—Contains a group for each VLAN configured on the access
points.
Chapter 6
for information on setting location. The null location
Performing Administrative Tasks
Set Up
78-14947-01
Set