Backupconfig - Cisco CiscoWorks 1105 User Manual

Appendix B Command Reference

backupconfig

Syntax Description
Usage guidelines
Example
Related Commands
78-14947-01
Use the backupconfig command to set the configuration for all backup and
restore operations. To clear the backup and restore configuration information, use
the no backupconfig command.
backupconfig {hostname} {username} {password} [directory]
no backupconfig
hostname Host name or IP address of the host system.
username Username of host system.
password Password of the host system.
directory Path to specific backup directory, if different from user's
default directory.
To set the configuration for all backup and restore operations, use the backup
command.
The following command will configure the backup and restore operations to
backup to and restore from host 209.165.200.224, set the username to user1, and
set the password to pass:
backupconfig 209.165.200.224 user1 pass
The following command clears all backup and restore configuration information:
no backupconfig
backup
listbackup
restore
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Privilege Level 15 Commands
B-19