Telnetenable - Cisco CiscoWorks 1105 User Manual

Appendix B Command Reference
Syntax Description
Example

telnetenable

Syntax Description
Default
78-14947-01
hostname Hostname of the external device.
ip-address IP address of the external device.
portnumber portnumber of the external device.
Enter the following command to telnet to port 9851 of a system with the IP
address 209.165.200.224:
telnet 209.165.200.224 9851
To configure Telnet access, use the telnetenable command.
telnetenable {enable [ip-addresses | domains] | disable | status}
enable Enables Telnet access to the system.
disable Disables Telnet access to the system.
status Displays current access status.
ip-addresses IP addresses of systems allowed Telnet access. If this
argument is used, no other machines will be allowed access.
Multiple IP address are allowed.
domains Domains of systems allowed Telnet access. If this argument
is used, machines with domains other than the specified
domain will be denied Telnet access. Multiple domains are
allowed.
The default is disable.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Privilege Level 15 Commands
B-73