Cisco CiscoWorks 1105 User Manual page 129

Chapter 3 Configuring Devices
Step 4
Setting Up 11a Radio Filters
Note
Step 1
Step 2
Step 3
78-14947-01
Select one of the following in the left pane:
Preview to see your changes before you apply them. (See
•
Template, page 3-131.)
Finish to save the template. (See
•
Another template category to configure more options. (See
•
Categories, page 3-2.)
Changing this setting may cause the access point to reboot.
Procedure
Select 11a Radio > Filters. The 11a Radio Filters dialog box displays in the right
pane.
Click see details to see which versions this option is valid for.
Complete the following:
Clicking Clear removes all the current entries in the window and any
Note
entries you have made in other Template windows up until that point.
Table 3-22 11a Radio Filters Settings
Field
Ethertype
Receive
Transmit
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Finishing the Template, page
Description
Enter the ID of a defined Ethertype filter, or
select one of the filters you created using
Association > Ethertype Filters.
Enter the ID of a defined Ethertype filter, or
select one of the filters you created using
Association > Ethertype Filters.
Using the Templates
Previewing the
3-132.)
Template
3-75