Cisco CiscoWorks 1105 User Manual page 78

Using the Templates
Using this option you can also:
•
•
Creating New Port Filters
Procedure
Step 1 To create and enable port filters, enter the following:
Note
Field
Add New Protocol Filter
Set ID
Set Name
Default Disposition
Default Time to Live (msec)
unicast
multicast
Step 2 Click Add. The new name is added to the Current Port Filters list.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-24
Create Special Cases —See
Delete Special Cases—See
Refer to the following URL for a list of IP port protocols:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/acc
sspts/ap350scg/ap350axb.htm#85314
Creating Special Cases, page
Deleting Special Cases, page
Description
Enter an identification number for the filter set.
Enter a descriptive filter set name.
See Naming Guidelines, page
From the list, select one of the following:
• Forward—Use this setting to forward traffic.
Block—Use this setting to block traffic.
•
Enter the number of milliseconds unicast packets
should stay in the access point's buffer before they
are discarded.
Enter the number of milliseconds multicast packets
should stay in the access point's buffer before they
are discarded.
Chapter 3 Configuring Devices
3-26.
3-28.
A-1.
78-14947-01