Chapter 3
Configuring Devices
Table 3-3
Field
Add New Ethertype Filter
Set ID
Set Name
Default Disposition
Default Time to Live (msec)
unicast
multicast
Click Add. The new name is added to the Ethertype Filters list.
Step 2
Step 3
Select one of the following:
•
•
•
78-14947-01
Creating New Ethertype Filters Settings
Description
Enter an identification number for the filter set.
Enter a descriptive filter set name.
See
From the list, select one of the following:
Enter the number of milliseconds unicast packets
should stay in the access point's buffer before they are
discarded.
Enter the number of milliseconds multicast packets
should stay in the access point's buffer before they are
discarded.
Preview to see your changes before you apply them. (See
Template, page
3-131.)
Finish to save the template. (See
Another template category to configure more options. (See
Categories, page
3-2.)
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Naming Guidelines, page
•
Forward—Use this setting to forward protocol
traffic.
•
Block—Use this setting to block protocol traffic.
Finishing the Template, page
Using the Templates
A-1.
Previewing the
3-132.)
Template
3-15