Cisco CiscoWorks 1105 User Manual page 46

Managing Profiles
Complete the following:
Step 2
Field
Enable
Poll Interval
Settings
Down
Up
Step 3 Go to step
Complete the following:
Step 4
Field
Enable
Poll Interval
Settings
Overloaded
Degraded
OK
Step 5 Click Reset to refresh any fields you have changed but want to restore, or Apply
to set the new entries.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
2-18
Description
Select to enable a threshold for this component.
From the list, select the polling interval.
From the list, select the severity level and the
number of polling cycles before the status is
Down.
From the list, select the number of polling
cycles before the fault is cleared and the status
is Up.
Step 5.
Description
Select to enable a threshold for this component.
From the list, select the polling interval.
From the list, select the severity level, the
percentage, and the number of polling cycles
before the status is Overloaded.
From the list, select the severity level, the
percentage, and the number of polling cycles
before the status is Degraded.
From the list, select the severity level, the
percentage, and the number of polling cycles
before the status is OK.
Chapter 2 Fault Monitoring
78-14947-01