Cisco CiscoWorks 1105 User Manual page 270

Displaying Current Reports
Procedure
Select Reports > Current. The window refreshes with a device selector in the left
Step 1
pane.
If you want to search for the device, use the dialog box in the left pane above the
Step 2
device selector:
a.
b.
Step 3 From the device selector in the left pane, click to expand the folder and select the
access point for which you want a report. The right pane refreshes.
Step 4 From the Report Name list, select AP IP Protocol Filters.
Click View. The report is displayed with the following headings:
Step 5
Table 5-19 AP IP Protocol Filters Report
Column
Filter Set Id
Filter Set Name
Default
Disposition
Filter Special Case
IP Protocol
Filter Special Case
Disposition
Filter Special Case
Priority
As Of
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
5-34
From the list, select the method you want to use to search for the device: by
name or by IP address.
Enter the IP address or name, or use an asterisk (*) as a wildcard to denote
numbers and letters, then click Search. The requested device appears in the
Search Results folder.
Description
The identification number of the filter set.
The name of the filter set.
The type of disposition configured: Forward (to forward
protocol traffic, or Block (to block protocol traffic).
The special case configuration.
The special case disposition.
The priority configuration based on the traffic type.
The time the access point's state last changed.
For more information, see
Chapter 5 Using Reports
Time Display, page 1-5.
78-14947-01