Cisco CiscoWorks 1105 User Manual page 346

Managing Groups
Creating a New Group
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-40
Procedure
Select Administration > Group Management. The group selector pane and
group window are displayed.
To create a new group, click Create New. The Create Group dialog appears and
the Search dialog appears above the group selector. To search for devices:
From the list in the search dialog, select the method for searching: by device
a.
name or IP address.
Enter the IP address or name. You can use asterisks (*) as wildcards. An
b.
asterisk denotes any number of characters in a name or an entire octet in an
IP address; for example, *AP or 172.*.*.*.
Click Search. The matching devices appear in the Search Results folder in the
c.
device selector.
Enter a name in the Name text box. Enter a description in the Description text box
(optional).
For information about the characters allowed in group names and descriptions, see
Naming Guidelines, page
To make your new group a subgroup of another group, select a group from the
Subgroup Of list. By default, all new groups are added at the top level ([root]).
Your new group will be added to the Subgroups Of list.
Note
From the group selector in the left pane, select a group that contains devices you
want to add to your new group. Devices in that group are added to the Available
Devices list in the Create Group dialog.
To add devices to the new group, select the group or individual devices from the
All Available Devices list and click >>. Devices are moved to the Devices in
Group list.
To add more devices to the new group, repeat Steps 5 and 6.
To remove devices from the group, select them from the Devices in Group list
and click <<.
Chapter 6
A-1.
Performing Administrative Tasks
78-14947-01