Chapter 3
Configuring Devices
Configuring Start-Up Settings
Step 1
Step 2
78-14947-01
Use this option to configure the access point for your network's BOOTP or DHCP
servers for automatic assignment of IP addresses.
Procedure
Select Services > Start-Up. The Services: Start-Up dialog box appears.
Complete the following:
Note
Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table 3-30 Start-Up Settings
Field
Configuration Server Protocol
Use prior Config Server settings
if no server responds?
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
From the list, select one of the following:
None—Use this setting if your network
•
does not have an automatic system for IP
address assignment.
•
BOOTP—Use this setting if IP addresses
are hard-coded based on MAC
addresses.
DHCP—Use this setting if IP addresses
•
are "leased" for predetermined periods
of time.
From the list, select one of the following:
yes—Use this setting to have the access
•
point save the boot server's most recent
response.
no—Use this setting to not use the most
•
recent response.
Using the Templates
3-103