Cisco CiscoWorks 1105 User Manual page 328

Using Discovery and Managing Devices
Step 5
Step 6
Step 7
Step 8
Run Discovery Now
Note
Step 1
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-22
Routers and switches that do not have access points attached to them are
Note
used when computing CDP distance. However, such devices will not
appear in the discovered devices list.
If you have not entered community strings that allow the WLSE to access all
devices to be discovered, click Enter community strings before running
discovery. The SNMP Community dialog box appears. For more information
about entering community strings, see
To schedule discovery, click Modify Schedule. The Modify Discovery Schedule
dialog box appears.
• Select the State Date and Start Time from the pulldown lists.
• To repeat discovery at specified intervals, click Enable. Then enter a number
in the Every textbox and select the interval from the list.
Click Next. The CDP Discovery - Summary dialog box appears.
Click Finish to submit your settings or Back to make changes in your settings.
Related Topic
Specifying Device Credentials, page 6-6
This option allows you to run an immediate, one-time discovery.
Your login determines whether you can use this option.
Procedure
Select Administration > Discover > DISCOVER > Run Discovery Now. The
Run Discovery Now - Seeds dialog box appears.
Chapter 6 Performing Administrative Tasks
Specifying Device Credentials, page 6-6.
78-14947-01