Cisco CiscoWorks 1105 User Manual page 338

Using Discovery and Managing Devices
Procedure
Select Administration > Discover > Export Devices > To CiscoWorks2000.
Step 1
Step 2 Enter the following information:
•
•
•
Step 3 Click Export.
The Export to CiscoWorks2000 Started window appears.
To see the export status log, click Status. The CiscoWorks2000 Export Status
Step 4
window appears. To refresh the status display, click Refresh.
If the Last Status button is displayed in place of the Status button, you can review
the results of a previous export.
The following information is included in the export status log:
Type of
Information
Device
information
Error messages
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-32
The CiscoWorks2000 server IP address.
The CiscoWorks2000 server port number. You may need to contact the
administrator of the CiscoWorks2000 server.
The username and password of any user who has the authority to export and
import device credentials on the CiscoWorks2000 server.
Description
Name of the device, device status, and device status details.
The string !{[NO VALUE]}! does not indicate an error; it
means information was not available to the
CiscoWorks2000 server while it was sending a response to
the WLSE.
The following message means that either the host or the
port specified in the WLSE export dialog was wrong:
Error: Could not connect to CiscoWorks2000
server:ip_address on port:port_number.
The following message means that either the user or
password specified in the WLSE export dialog was wrong:
Error: Connected to CiscoWorks2000 server:ip_address on
port:port_number successfully, but server returned error
after connection.
Chapter 6 Performing Administrative Tasks
78-14947-01