Cisco CiscoWorks 1105 User Manual page 263

Chapter 5 Using Reports
Table 5-15 Detailed Report (continued)
Column
IP Address
Software Version
Number of Clients Connected
Number of Bridges Connected
Number of AP-Repeaters
Connected
Model
SSID
Radio Cell Role
Subnet Mask
Ensure Compatibility With
2Mbps Clients
Ensure Compatibility With
non-Aironet 802.11
SNMP Trap Destination
HTTP Port
Hot StandBy
Count of Access Point observed
by this AP
Current operating frequency
channel
78-14947-01
Description
The device's IP address.
Click to open up a browser window to the AP
Summary Status.
The device's software version.
The number of wireless clients connected to
the device.
The number of bridges connected to the
device.
The number of AP repeaters connected to the
device.
The hardware model of the device.
The unique identifier the client device uses to
associate with the access point.
Indicates the role of the device.
The subnet mask.
Indicates whether it is compatible with
2Mbps clients.
Indicates whether it is compatible with
802.11.
The IP address or host name of the server
running the SNMP Management software.
The device's HTTP setting.
Indicates whether the hot standby unit is in
monitoring mode.
If true, the current unit is in monitoring
mode.
Number of access points seen by the access
points.
The radio channel being used.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Displaying Current Reports
5-27