Cisco CiscoWorks 1105 User Manual page 119

Chapter 3 Configuring Devices
Table 3-18 11b Radio Hardware Settings (continued)
Field
Receive Antenna
Transmit Antenna
78-14947-01
Description
From the list, select one of the following:
•
•
•
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Right—Use this setting if your access
point has removable antennas and you
install a high-gain antenna on the access
point's right connector. (When you look
at the access point's back panel, the right
antenna is on the right.)
Use this setting for both receive and
transmit.
Left—Use this setting if your access
point has removable antennas and you
install a high-gain antenna on the access
point's left connector. (When you look at
the access point's back panel, the left
antenna is on the left.)
Use this setting for both receive and
transmit.
Diversity—Use this setting if your
access point has two fixed
(non-removable) antennas; it tells the
access point to use the antenna that
receives the best signal.
Use this setting for both receive and
transmit.
Using the Templates
3-65