Cisco CiscoWorks 1105 User Manual page 45

Chapter 2 Fault Monitoring
Step 5
Setting Switch Fault Thresholds
Step 1
78-14947-01
Field
Degraded
OK
Click Reset to refresh any fields you have changed but want to restore, or Apply
to set the new entries.
Using this option, you can set up thresholds for switch faults. When the thresholds
are exceeded, faults are generated and can be viewed under Faults > Display
Faults.
Procedure
Select any of the following to set values for:
SNMP Reachable —Go to
•
CPU Utilization—Go to
•
Memory Utilization—Go to
•
• Port Status—Go to
Port Utilization—Go to
•
• Module Status—Step
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
From the list, select the severity level,
the percentage, and the number of
polling cycles before the status is
Degraded.
From the list, select the severity level,
the percentage, and the number of
polling cycles before the status is OK.
Step 2.
Step 4.
Step 4.
Step 2.
Step 4.
2.
Managing Profiles
2-17