Download Print this page

Advertisement

Release Notes for
Cisco Configuration Professional Express 1.0
May 19, 2008
These release notes support Cisco Configuration Professional Express (Cisco CP Express) 1.0. They
should be used with the documents listed in the
particular, the Release Notes for Cisco Configuration Prefessional.
These release notes are updated as needed. To ensure that you have the latest version of these release
notes, go to http://www.cisco.com/go/ciscocp. In the Support box, click General Information >
Release Notes. Then, find the latest release notes for your release.
Contents
This document contains the following sections:

Introduction

Cisco CP Express is a graphical configuration tool that enables a user to configure a LAN and WAN
connection, make security settings to protect the router, and, configure a basic firewall, and Network
Address Translation. Cisco CP Express is installed in Flash memory on routers shipped with Cisco
Configuration Professional (Cisco CP).
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2008 Cisco Systems, Inc. All rights reserved.
Introduction, page 1
Caveats, page 12
"Related Documentation" section on page 15
and in

Advertisement

   Related Manuals for Cisco 1811W

   Summary of Contents for Cisco 1811W

  • Page 1: Table Of Contents

    • Introduction Cisco CP Express is a graphical configuration tool that enables a user to configure a LAN and WAN connection, make security settings to protect the router, and, configure a basic firewall, and Network Address Translation. Cisco CP Express is installed in Flash memory on routers shipped with Cisco Configuration Professional (Cisco CP).

  • Page 2: System Requirements

    Cisco CP Ordering Options, page 7 • PC System Requirements Cisco CP Express can run under the native Java Virtual Machine in the supported browsers, and also JRE. Table 1 lists the system requirements for a PC running Cisco CP Express including Web browser versions and Java runtime environment versions.

  • Page 3

    Cisco CP Express does not support Telco/CO router models. Note Cisco 800 Series Cisco CP Express is supported on the following Cisco 800 series routers: Cisco 815 • Cisco 861 • Cisco 881 • Cisco 888 • Cisco 1800 Series...

  • Page 4

    System Requirements Cisco 3800 Series Cisco CP Express is supported on the following Cisco 3800 series routers: Cisco 3825 • Cisco 3845 • Supported Adapters, Cards and Network Modules This section contains support information about adapters, cards, and network modules...

  • Page 5

    WIC-1AM • WIC-2AM • WIC-4ESW • WIC-1SHDSL-V2 • WIC-1SHDSL-V3 • • WIC 1ADSL-DG • WIC 1ADSL-I-DG Cisco CP Express supports the following high-speed WAN interface cards (HWICs): HWIC-4T • HWIC-4A/S • HWIC-4ESW • HWIC-8A/S-232 • HWICD-9ESW • HWIC-16A • HWIC-AP-G-X •...

  • Page 6: Memory Requirements

    Cisco 3800 Determining the Cisco IOS Release To determine the release of Cisco IOS software currently running on your Cisco router, log in to the router and enter the show version EXEC command. The following sample output from the show version command indicates the Cisco IOS release on the second output line: Router>...

  • Page 7

    128MB.sdf 256MB.sdf Cisco CP Ordering Options Cisco CP Express is shipped with every ordering option under which Cisco CP can be ordered. on page 7 describes the Cisco CP ordering option. Ordering options are also referred to as SKUs. Table 4...

  • Page 8: Installation Notes

    Uninstalling Cisco CP Express Files If you want to remove Cisco CP Express from flash memory or from a router disk file system, you can do so by logging onto the router and completing the following steps in EXEC mode: Change to the directory in which the Cisco CP Express files are located.

  • Page 9: Limitations And Restrictions

    Replace N with the actual number of the disk. Use the slot keyword instead of the disk keyword if necessary. Use the delete command to remove the Cisco CP Express files. The example below deletes the file Step 2 cpexpress.tar: router# delete cpexpress.tar...

  • Page 10

    Important Notes Cisco CP Express and use a console or Telnet connection to log into the router, the login and exec banners warn you that you must change the username “cisco” and password “cisco” before you log off of the router. If you do not change the credentials as directed, you will not be able to log on to the router the next time that you attempt to do so.

  • Page 11

    • avoid a known launch issue with Cisco CP Express. The PC on which Cisco CP Express is to run and the interface through which Cisco CP Express will • be launched must be configured with IP addresses from the same subnet.

  • Page 12: Caveats

    Popup Blockers Disable Cisco CP Express Online Help If you have enabled popup blockers in the browser you use to run Cisco CP Express, online help will not appear when you click the help button. To prevent this from happening, you must disable the popup blocker when you run Cisco CP Express.

  • Page 13

    SDP application is launched after you complete the Cisco CP Express wizard and deliver the commands to the router. After the commands are delivered, Cisco CP Express closes, but the two browser windows associated with Cisco CP Express do not close automatically. This behavior has been observed in all browsers.

  • Page 14

    • CSCec31789 When you update Cisco CP Express, if any of the uploaded files shows a size of zero bytes when show flash is invoked, no operations such as copy or delete can be performed on flash memory. This problem rarely occurs.

  • Page 15: Related Documentation

    This document is to be used in conjunction with the documents listed in the CCVP, the Cisco logo, and Welcome to the Human Network are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.;...

  • Page 16

    Related Documentation Release Notes for Cisco Configuration Professional Express 1.0 OL-16652-01...

Comments to this Manuals

Symbols: 0
Latest comments: