Traceroute - Cisco CiscoWorks 1105 User Manual

Appendix B Command Reference
Example

traceroute

Syntax Description
78-14947-01
This command displays the current software on the system:
show version
Copyright (c) 1999-2000 by Cisco Systems, Inc.
Build Version (166) Mon Jun 11 16:56:23 PDT 2001
Uptime: 4 days 20 hours 6 mins
Linux/UID32 version 2.2.16-13bipsec.uid32 (gcc version egcs1
To display the network route to a specified host and identify faulty gateways, use
the traceroute command.
traceroute [-f first_ttl] [-m max_ttl] [-w waittime] host [packetlength]
-f (Optional) Sets the time-to-live used in the first outgoing
probe packet.
first_ttl Time-to-live value of the first outgoing probe packet. The
default is 1 hop.
-m (Optional) Sets the maximum time-to-live (maximum
number of hops) used in outgoing probe packets.
max_ttl Maximum time-to-live for outgoing probe packets. The
default is 30 hops.
-w (Optional) Sets the time to wait for a response to a probe, in
seconds.
waittime Time to wait for a response to a probe, in seconds. The
default is 5.
host Name or IP address of host to which to connect.
packetlength (Optional) The length of the packet to send, in bytes. The
default and minimum value is 40.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Privilege Level 0 Commands
B-15