Cisco CiscoWorks 1105 User Manual page 44

Managing Profiles
•
•
•
•
•
Step 2 Complete the following:
Field
Enable
Poll Interval
Settings
Down
Up
Step 3 Continue to
Complete the following:
Step 4
Field
Enable
Poll Interval
Settings
Overloaded
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
2-16
Ethernet Port Utilization—Go to
Ethernet Port Packet Errors—Go to
Associated Clients—Go
SSID Mismatch Rate—Go
Association Rate—Go to
Step 5.
Step 4.
Step 4.
toStep 4.
toStep 4.
Step 4.
Description
Select to enable a threshold for this component.
From the list, select the polling interval.
From the list, select the severity level and the
number of polling cycles before the status is
Down.
From the list, select the number of polling
cycles before the fault is cleared and the status
is Up.
Description
Select to enable a threshold for this
component.
From the list, select the polling
interval.
From the list, select the severity level,
the percentage, and the number of
polling cycles before the status is
Overloaded.
Chapter 2 Fault Monitoring
78-14947-01