Cisco CiscoWorks 1105 User Manual page 59

Chapter 3 Configuring Devices
Table 3-1
Field
Configuration Server Protocol
Default Subnet Mask
Default Gateway
78-14947-01
Express Template Settings (continued)
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
Set this entry to match the network's method
of IP address assignment.
From the list, select one of the following
options:
None-Static IP—Use this if your
•
network does not have an automatic
system for IP address assignment.
• BOOTP—Use this if your network uses
Bootstrap Protocol, in which IP
addresses are hard-coded based on MAC
addresses.
• DHCP—Use this if your network uses
Dynamic Host Configuration Protocol,
in which IP addresses are "leased" for
predetermined periods of time.
Enter an IP subnet mask to identify the
subnetwork so the IP address can be
recognized on the LAN.
If DHCP or BOOTP is not enabled, this field
is the subnet mask.
If DHCP or BOOTP is enabled, this field
provides the subnet mask only if no server
responds to the access point's DHCP or
BOOTP request.
Enter the IP address of your default Internet
gateway.
The entry 255.255.255.255 indicates no
gateway.
Using the Templates
3-5