Exporting Devices - Cisco CiscoWorks 1105 User Manual

Cisco systems wireless lan solution engine user guide
Table of Contents

Advertisement

Chapter 6
Performing Administrative Tasks
Step 3

Exporting Devices

Note
78-14947-01
To see the Import Status log, click Status. The CiscoWorks2000 Import Status
window appears. To refresh the status display, click Refresh.
If the Last Status button is displayed in place of the Status button, you can
review the results of a previous import.
If the import fails because you entered the wrong data in the Import dialog
box, one of the following error messages is included in the Import Status log:
The following message means that either the host or the port specified in
the WLSE import dialog was wrong:
Error: Could not connect to CiscoWorks2000 server:ip_address on
port:port_number.
The following message means that either the user or password specified
in the WLSE import dialog was wrong:
Error: Connected to CiscoWorks2000 server:ip_address on
port:port_number successfully, but server returned error after
connection.
If the import succeeds, you can view detailed information in the Discovery
Run Log. See
Viewing Inventory and Discovery Task History, page
Related Topics
Import Devices from a File, page 6-29
Schedule Discovery, page 6-20
You can export all WLSE-discovered devices to a CiscoWorks2000 server
running Resource Manager Essentials. The information exported consists of the
device IP addresses and their credentials.
The time required to export devices depends on the number of devices exported
and the response from the CiscoWorks2000 server. The following procedure
explains how to check the status of the operation.
Your login determines whether you can use this option.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Using Discovery and Managing Devices
6-27.
6-31

Advertisement

Table of Contents
loading

Table of Contents