Cisco CiscoWorks 1105 User Manual page 82

Using the Templates
Step 3
Step 1
Step 2
Configuring Policy Groups
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-28
Select one of the following in the left pane:
Preview to see your changes before you apply them. (See
•
Template, page 3-131.)
Finish to save the template. (See
•
Another template category to configure more options. (See
•
Categories, page 3-2.)
Deleting Special Cases
Procedure
To delete special cases, select the port name from the list box, then click Delete.
Select one of the following in the left pane:
Preview to see your changes before you apply them. (See
•
Template, page 3-131.)
Finish to save the template. (See
•
Another template category to configure more options. (See
•
Categories, page 3-2.)
Policy groups are used to configure access parameters to a logical group of
stations in a consistent manner from a single place. For example, protocol filters
can be applied to frames for a selected group of stations.
Chapter 3
Finishing the Template, page
Finishing the Template, page
Configuring Devices
Previewing the
3-132.)
Template
Previewing the
3-132.)
Template
78-14947-01