Cisco CiscoWorks 1105 User Manual page 87

Chapter 3 Configuring Devices
Adding a New VLAN
To add a new VLAN, enter the following:
Step 1
Table 3-7
Field
VLAN ID
VLAN Name
VLAN Enable
Default Priority
Default Policy
Group
78-14947-01
Adding a New VLAN Settings
Description
Enter the identification number of the VLAN.
Note This setting must match the setting on the switch.
Enter the a unique name for the VLAN configured on the
access point.
From the list, select one of the following:
Enabled—Use this setting to enable the VLAN.
•
• Disabled—Use this setting to disable the VLAN.
From the list, select one of the following:
• Background—Use this setting for bulk transfers and
other activities that are allowed on the network but
should not impact network use by other users and
applications.
Default—Use this setting for normal LAN traffic.
•
• Excellent Effort—Use this setting for the network's
most important users.
Controlled Load—Use this setting for important
•
business applications that are subject to some form
of admission control.
Interactive Video—Use this setting for traffic with
•
less than 100 ms delay.
Interactive Voice—Use this setting for traffic with
•
less than 10ms delay.
Network Control—Use this setting for traffic that
•
must get through to maintain and support the
network infrastructure.
Enter the default policy group number, or select one you
created using Association > Policy Groups.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Using the Templates
3-33