Cisco CiscoWorks 1105 User Manual page 163

Chapter 3 Configuring Devices
Step 3
Configuring Hot Standby Settings
Step 1
78-14947-01
Table 3-31 Console/Telnet Settings (continued)
Field
Columns (64-132)
Lines (16-50)
Telnet
Select one of the following in the left pane:
Preview to see your changes before you apply them. (See
•
Template, page 3-131.)
Finish to save the template. (See
•
• Another template category to configure more options. (See
Categories, page 3-2.)
Use this option to configure a standby access point as a client device associated
to a monitored access point.
Procedure
Select Services > Hot Standby. The Services: Hot Standby dialog box appears.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
Enter a number to define the width of the
terminal emulator display within the range of
64 characters to 132 characters.
Enter a number to define the height of the
terminal emulator display within the range of
16 characters to 50 characters.
From the list, select one of the following:
Enable—Use this setting to enable
•
Telnet access to the management system.
• Disable—Use this setting to prevent
Telnet access to the management system.
Finishing the Template, page
Using the Templates
Previewing the
3-132.)
Template
3-109