Cisco CiscoWorks 1105 User Manual page 147

Chapter 3 Configuring Devices
Complete the following:
Step 2
Note
Table 3-27 Local Admin Access Settings
Field
Local Admin Authentication
Allow read-only browsing
without login
Using this option you can:
Step 3
•
•
Adding Users
Procedure
To add a new user, enter the following:
Step 1
Field
User ID
User name
User password
Capabilities
78-14947-01
Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Add Users—See Adding Users, page
Delete Users—See Deleting Users, page
Description
Enter an identification number for the user.
Tip
Enter the name for the user.
Enter a password for the user.
Select the capabilities you want to allow the user.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
Select Enable to enable local admin
authentication, or Disable to disable it.
Select Yes to allow it, or No to disallow it.
3-93.
3-94.
If you want to set the same user name on all
access points and do not know which user ID's
may already be in use, enter a very high value
(2000).
Using the Templates
3-93