Gethostbyname; Hostname - Cisco CiscoWorks 1105 User Manual

Appendix B Command Reference

gethostbyname

Syntax Description
Example

hostname

Syntax Description
78-14947-01
Ethernet 1 port is connected to an internal LAN or VLAN, and is configured
•
to be accessible via any of the supported protocols by entering the following
command:
firewall eth1 private
An on-site user has full access to the WLSE, but an external user can only
access it using a secure connection.
Use the gethostbyname command to display the IP address of a known domain
name.
gethostbyname host
host Domain name of host.
This command displays the IP address of example.com
gethostbyname example.com
209.165.200.224
To change the system hostname, use the hostname command.
hostname name
name New hostname for the WLSE; the name is case sensitive and
may be from 1 to 22 alphanumeric characters.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Privilege Level 15 Commands
B-25