Cisco CiscoWorks 1105 User Manual page 398

Firmware
Table 8-3 Troubleshooting Hints for Firmware
Feature
Firmware > Jobs
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
8-8
Symptom Probable Cause
There is a time The time was not set
discrepancy in correctly on the WLSE.
scheduled jobs.
Firmware is not There were warnings
updated on all the during the job but Ignore
devices included Warnings was not set. A
the job. firmware job runs even
though there are
warnings, but the job
fails for the devices that
had warnings.
Email about job The SMTP server is not
completion fails to specified.
arrive at
destination.
Chapter 8 Troubleshooting
Possible Solution
Reset the WLSE time to
1.
Universal Coordinated
Time (UTC) using CLI
commands as follows:
Enter services stop
a.
to stop services.
Enter the clock
a.
command to reset
the time.
a. Enter services start
to restart the
services.
Set the time in local
2.
browser time, select
Administration >
Appliance >
Time/NTP/Name.
Select Ignore Warnings in
Firmware > Jobs > Create
Job before running the job.
See Finishing the Job,
page 4-14.
Configure the mail route by
selecting Administration >
Appliance > Configure
Mailroute. See Specifying an
SMTP Mail Server,
page 6-71.
78-14947-01