Cisco CiscoWorks 1105 User Manual page 167

Chapter 3 Configuring Devices
Step 3
Configuring DNS Settings
Step 1
Step 2
78-14947-01
Table 3-34 CDP Settings (continued)
Field
Packet Hold Time
Packet Sent Every
Select one of the following in the left pane:
• Preview to see your changes before you apply them. (See
Template, page 3-131.)
Finish to save the template. (See
•
• Another template category to configure more options. (See
Categories, page 3-2.)
Use this option to configure the access point to work with your network's Domain
Name System (DNS) server.
Procedure
Select Services > DNS. The Services: DNS dialog box appears.
Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
Enter the number of seconds other
CDP-enabled devices should consider the
access point's CDP information valid.
Enter the number of seconds between each
CDP packet the access point sends.
This value should always be less than the
packet hold time.
Finishing the Template, page
Using the Templates
Previewing the
3-132.)
Template
3-113