Cisco CiscoWorks 1105 User Manual page 422

Privilege Level 0 Commands
Usage Guidelines
Example
Related Commands
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
B-16
Use the traceroute command to trace the network route to a specified host and
identify faulty gateways. The command displays a list of the hosts that receive
probe packets as they travel to the destination host, in the order that the receiving
hosts receive the packets. Asterisks (*) appear as the list entry for hosts that do
not respond to probing correctly.
This command displays the network route to the host otherhost with a packet
time-to-live value of 2, a wait time of 5 seconds, and 50-byte packets:
traceroute -m 20 -w 10 cisco.com 50
traceroute to example.com (209.165.200.224), 20 hops max, 50 byte
packets
1 ex1.com (209.165.200.225)
2 ex2.com (209.165.200.254)
3 ex3.com (209.165.200.255)
4 ex4.com (209.165.201.0)
5 ex5.com (209.165.201.1)
6 ex6.com (209.165.201.30)
7 ex7.com(209.165.201.31)
8 ex8.com (209.165.202.128)
9 ex9.com (209.165.202.129)
10 ex10.com (209.165.202.158)
11 ex11.com (209.165.202.159)
ping
Appendix B
0.981 ms 0.919 ms
1.528 ms 0.747 ms 0.661 ms
0.887 ms 0.770 ms
0.932 ms 0.789 ms
1.066 ms 1.052 ms
1.472 ms 1.247 ms
1.738 ms 1.424 ms
3.728 ms 2.429 ms
6.283 ms 5.499 ms 3.285 ms
9.926 ms 73.463 ms
70.967 ms * 47.106 ms
Command Reference
0.926 ms
0.744 ms
0.679 ms
0.983 ms
1.847 ms
1.658 ms
2.804 ms
3.895 ms
78-14947-01