Cisco CiscoWorks 1105 User Manual page 64

Using the Templates
Complete the following:
Step 3
Note
Table 3-2
Field
Spanning Tree Protocol
(STP)
Always Unblock
Ethernet when STP is
disabled
Root Configuration
Priority (0-65535)
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-10
Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Spanning Tree Protocol Settings
Description
From the list, select one of the following:
•
•
From the list, select one of the following:
•
•
Click see details to see which versions this setting is
valid for.
Enter a number to influence which bridge is
designated the root bridge in the spanning tree.
When bridges have the same priority setting, STP
uses the MAC addresses as a tiebreaker.
The bridge with the lowest priority setting is likely
to be designated the root bridge in the tree.
Chapter 3
Enable—Use this setting to enable STP on the
bridge.
Disable—If you do not want STP enabled the
bridge.
Yes—Use this setting to maintain a bridge link
when STP is disabled
No—Use this setting to not maintain a bridge
link when STP is disabled.
Configuring Devices
78-14947-01