Cisco CiscoWorks 1105 User Manual page 121

Chapter 3 Configuring Devices
Table 3-19 11b Radio Advance Settings
Field
Status
Packet Forwarding
Default Multicast Address Filter From the list, select one of the following:
Maximum Multicast
Packets/Second
78-14947-01
Description
From the list, select one of the following:
•
•
From the list, select one of the following:
•
•
•
•
Use this setting to control the number of
multicast packets that can pass through the
Ethernet port each second.
If you enter 0, the access point passes an
unlimited number of multicast packets.
If you enter a number other than 0, the device
passes only that number of multicast packets
per second.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
up— Enables the Radio port for normal
operation.
down—Disables the device's Radio port.
enabled—Allows normal operation.
disabled—Prevents data from moving
between the Ethernet and the radio,
which is useful in troubleshooting.
Allowed—The access point forwards all
traffic except packets sent to the MAC
addresses set as disallowed under
Association > Address Filters.
Disallowed—The access point discards
all traffic except packets sent to the MAC
addresses set as allowed under
Association > Address Filters.
Using the Templates
3-67