Cisco CiscoWorks 1105 User Manual page 243

Chapter 5 Using Reports
From the list, select the method you want to use to search for clients: by MAC
Step 2
address or name.
Enter the MAC address or name. You can use an asterisk (*) as a wildcard to
Step 3
denote numbers and letters.
Note
Step 4 Click Search. A list appears in the left pane.
If you chose MAC address in the previous step, MAC addresses are listed; if you
chose name, names are listed.
Click the MAC address or name. The right pane refreshes and displays the Client
Step 5
Detail Report, which is the default report, with the following information:
Table 5-5
Column
Name
IP Address
Classification
Associated with
State
Time last seen
Software Version
MAC Address
To export the report, click Export. (See
Step 6
To email the report, click Email Report. (See
Step 7
78-14947-01
The MAC address must be entered in hexadecimal, for example
0070eb37c90.
Client Detail Report
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Displaying Wireless Client Reports
Description
The name assigned to the wireless client
device.
The IP address of the wireless client device.
The type of wireless client device.
The name or IP of the access point with
which it was last associated.
The operational state of the wireless client
device.
The time the client was last seen by the
system.
The version of wireless client software.
The MAC address of the wireless client.
Exporting a Report, page
Emailing a Report, page
5-66.)
5-66.)
5-7