Displaying An Ap Ip Port Filters Report - Cisco CiscoWorks 1105 User Manual

Chapter 5 Using Reports
Step 6
Step 7
Step 8

Displaying an AP IP Port Filters Report

Step 1
Step 2
Step 3
Step 4
78-14947-01
To sort table data, click on the column heading you want to use to sort the data:
A triangle indicates ascending order.
•
An upside-down triangle indicates descending order.
•
• No triangle indicates that the data is not sorted.
To export the report, click Export. (See
To email the report, click Email Report. (See
This device report lists the various IP port filters configured on the access point.
Procedure
Select Reports > Current. The window refreshes with a device selector in the left
pane.
If you want to search for the device, use the dialog box in the left pane above the
device selector:
From the list, select the method you want to use to search for the device: by
a.
name or by IP address.
Enter the IP address or name, or use an asterisk (*) as a wildcard to denote
b.
numbers and letters, then click Search. The requested device appears in the
Search Results folder.
From the device selector in the left pane, click to expand the folder and select the
access point for which you want a report. The right pane refreshes.
From the Report Name list, select AP IP Port Filters.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Displaying Current Reports
Exporting a Report, page
Emailing a Report, page
5-66.)
5-66.)
5-35