Cisco CiscoWorks 1105 User Manual page 183

Chapter 3 Configuring Devices
Configuring Event Notification
Step 1
Step 2
78-14947-01
Use this option to enable and configure notification of fatal, alert, warning, and
information events to destinations external to the access point, such as an SNMP
server or a Syslog system.
Procedure
Select Events > Event Notification. The Events: Event Notification dialog box
appears.
Complete the following:
Note Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Table 3-42 Events > Event Notification Settings
Field
Should Notify-Disposition
Events generate SNMP Traps?
SNMP Trap Destination
SNMP Trap Community
Should Notify-Disposition
Events generate Syslog
Messages?
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Description
From the list, select one of the of the
following:
• Yes—Use this option to send event
notifications to an SNMP server.
• No—Use this option if you do not want
to send notifications to an SNMP server.
Enter the IP address or the host name of the
server running the SNMP Management
software.
Enter the SNMP community name.
From the list, select one of the of the
following:
• Yes—Use this option to send event
notifications to a Syslog server.
• No—Use this option if you do not want
to send notifications to a Syslog server.
Using the Templates
3-129