Cisco CiscoWorks 1105 User Manual page 329

Chapter 6 Performing Administrative Tasks
If necessary, add seed devices:
Step 2
Note
a.
b.
Step 3 If you have not added community strings that allow the WLSE to access all
devices to be discovered, click Enter community strings before running
discovery. The SNMP Community dialog appears. For more information about
entering community strings, see
Step 4 Click Run Now. The Discovery - Summary dialog box appears.
•
•
Step 5 The Tasks History window appears. You can expand the Discovery folder to see
the results of the discovery:
•
•
Related Topics
•
78-14947-01
Any seed devices added here are used for this one-time discovery only.
Enter the seed device's IP address or device name in the Add Seed Value text
box and click >>.
Device names must resolve to your local DNS in order to translate device
names to IP addresses during discovery. The requirements for entering device
names are:
Blank spaces are not allowed.
–
– The first character in a name must be alphanumeric.
The only valid characters are the alphanumeric characters, the minus sign
–
(-), and the period (.).
– The last character cannot be a minus or a period.
Set the CDP by selecting a number from the list.
Click Back if you want to make changes before running the discovery.
Click Finish to run the discovery. The discovery will begin within 2 minutes.
Immediate discoveries are named CDPDiscovery_Run_Now_number. The
number increments each time you run an immediate discovery.
Click the discovery name. The Run Log appears, showing the start and end
times of the discovery and information about the devices that were
discovered.
Specifying Device Credentials, page 6-6
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Using Discovery and Managing Devices
Specify Community Strings, page 6-7.
6-23