Cisco CiscoWorks 1105 User Manual page 168

Using the Templates
Step 3
Configuring FTP Settings
Step 1
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-114
Table 3-35 DNS Settings
Field
Domain Name System (DNS)
Default Domain
Domain Name Servers
Domain Suffix
Select one of the following in the left pane:
Preview to see your changes before you apply them. (See
•
Template, page 3-131.)
• Finish to save the template. (See
Another template category to configure more options. (See
•
Categories, page 3-2.)
Use this option to configure File Transfer Protocol settings for the access point.
All non-browser file transfers are governed by these settings.
Procedure
Select Services > FTP. The Services: FTP dialog box appears.
Chapter 3
Description
From the list, select one of the following:
Enable—Use this option if your network
•
DNS.
Disable—Use this option if you network
•
does not use DNS.
Enter the name of your network's IP domain.
Your entry might look like this:
mycompany.com
Enter the IP addresses of up to three domain
name servers on your network.
Enter the portion of the full domain name
that you would like omitted from access
point displays.
Finishing the Template, page
Configuring Devices
Previewing the
3-132.)
Template
78-14947-01